The bathroom is a special room in your apartment, and to its repair should be approached with special attention. Because here in large quantities and often water flowing in this room there are large changes in temperature and humidity. For a correct and rational organization of the finishing works it must be hard to know where to begin repairs in the bathroom and have an idea about the sequence of repairs.
Determine the type of repair
Renovations in the bathroom can be:
Unplanned. The need for spontaneous repair may occur if there is an emergency (burst pipe, or you are flooded neighbors). If you decide to replace the bath, this may cause a sudden repair (changing of sewer pipes, installation of other plumbing, updated tile, etc.);
Scheduled repairs. The complexity and costs of the planned repairs can be major or minor. Of course, redecorating is cheaper, but to carry out such works only in the absence of fungus and the condition of the water supply and plumbing. Such a repair involves the replacement of wall and ceiling coverings, update the floor and mixers. A more serious repair, even if not quite thorough, requires thorough preparation and serious approach.
Draw up a repair plan and define future design
Making repairs in the bathroom with their hands, and wondering where to start, you should first determine the future design of this room. Imagine what would you like to see your bathroom, decide the color. Traditional colors for this room are pastel colors or combination of two colors (e.g., blue and blue or peach and beige).
Then you need to decide what materials will be used for finishing. For finishing the bathroom frequently use:
- The plastic panels.
Carefully inspect your plumbing and if necessary, decide on the option of replacing outdated plumbing fixtures.
Using a ruler measure the height, width and length of the room, calculate its area. Determine where to place sanitary devices, because to change anything after the repair is unlikely to succeed.
Video: Contemporary design and planning bathroom
Selection and acquisition of new plumbing and finishing materials
Having decided on their own to carry out repairs in his bathroom, many owners wonder where to start repairs in the bathroom and go to choose a new plumbing appliances and decoration materials. Of course, this phase of repair is very important, but should follow only after you are fully decided on the design of the new plumbing and the number of required finishing materials.
Before purchasing plumbing fixtures be sure to check their dimensions to see if they fit your bathroom.
To purchase finishing materials and tools is better in one store, where wholesale purchase, you will be offered a good discount. Buy everything you need at once in full, so you do not waste time and not to run in search of the missing material.
The dismantling of the old finishing materials and sanitary ware
Next, prepare the room before the repair work. The sink and tub for better repair time to dismantle, even if you don’t intend to change them.
Then you need to remove the old tile floors, clean ceiling, walls and floor. If the walls in the bathroom were painted with a paint, and should be removed completely. Because an adhesive mixture, or a new coat of paint on the old surface would not stick.
Removal of old tiles. Photos tamabau.de
Laying of pipes, conduits and other utilities
Dismantling the old coating, you can begin to replace the pipes. In old houses should change in addition to the pipe directly under the bathroom, and the main riser (in the case of combined bathroom); and in some cases even the water pipes between floors. Since old pipes can leak, resulting in a new, unplanned repair and new costs.
At this stage of repair should be replaced and wiring. Determine where to place the appliances and move the required number of sockets, change the wire and breaker.
Don’t forget take care of the repair and installation of ventilation, it is very important for the bath. It is best if the ventilation is forced. On the market today there are many options for different fans for forced ventilation.
The alignment of the walls, ceiling and floor
The scope and nature of these works depends on the condition of the surfaces. If the walls are not very smooth, you will have to deal with their alignment with plaster. With fairly smooth walls and ceiling, there is no need to use a large layer of material, and in some cases you can do a skim coat. If the surface must be leveled very much, the repair may be delayed.
The alignment of the walls with putty. Photos www.filippo.nl
Finish facing materials
You can now start finishing the walls and ceiling: paint, stack the tiles to cover the selected compounds, etc.
A great option would be ceiling emulsion paint: the ceiling looks very nice, it does not accumulate moisture and you can pick up any color. A more practical alternative may be the installation of plastic panels or suspended ceiling.
If you will install the tub, closed the screen, it is possible the floor below it is not tiled to save material.
Installation of plumbing fixtures
Sanitary appliances installed after all finishing work, so as not to damage the new (old) plumbing in the repair process and to ensure unhindered access to the room surfaces that require finishing.
Shell Assembly. Photos contentfreelance.com
Installation of accessories and entrance door
In the final stages of repair in the bathroom is furniture and accessories (hooks, mirrors, lamps, etc.). Also just now replaced the door. To change the doors early is not: it can be easily damaged in the repair process, bringing and installing the plumbing.
Now you know where to begin repairs in the bathroom, and in what sequence to perform the work. So will easily cope with this difficult task, and updated bathroom will delight you with its brilliance, and flawless appearance.
Video: Recommendations for repair and savings on bathroom remodeling